Cylinder Dryers :
- Dhall Cylinder Dryers are an efficient & Cheapest system for fabric drying, with energy saving, since it is direct contact drying.
- Dhall cylinder dryers are designed for single or double end fabric, running side by side for getting higher production.
- High efficient drying capacity is ensured at higher temperature working.
- Dhall Cylinder dryers are used in continuous operation with wet processing, finishing lines and as a separate drying m/c as well.
Cylinder Vertical Drying Range has the following salient features :
- Sturdy side walls fabricated from single piece steel plate.
- Platform with guards and staircase provided for easy maintenance.
- Fabric entry to the first Cylinder can be from top or bottom, as per customer request.
- Heavy duty ball bearing with pedestal for longer life
- Compensator assembly, controlled by pneumatic and mechanical for tension control on fabric.
- Suitable number of stainless steel guide roll from 100 mm 150 mm, 175 mm and 200 mm diameter.
- Condense water removal by separate pipe for initial start of machine.
- Zero leakage system with special design rotary joint & Teflon hoses.
Optional Items Supplied on Request :
- Stainless Steel Exhaust hood with Roof steam heated.
- Teflon coating of cylinder with 50 to 60 microns from Dupont-USA Material.
- Chiller unit for Cooling cylinder.
- Moisture controller from pleva/Malho.
- Flat belt from Habasit/ Siegiing make.
- Steam accessories for individual cylinder with Trap, Stainer, Non return valve from Spirax or Similar make.
- Individual motor drive on each cylinder or belt drive.
- Same side contact of fabric on cylinder drier for sensitive /piled fabrics.
- Insulation material on the side's cylinder for protection of heat losses.
 |
 |
| |
|
Vertical 24 Cylinder [22 HOT+2 COLD] drying range with individual motor drive on each cylinder along with the
stainless steel exhaust hood. Running in line with Goller
Germany merceriser m/c. |
Vertical 20 Cylinder [18 HOT+ 2 COLD] Vertical Drying Range showing the service lines like steam inlet and condensate removing, along with the platform and staircase. Running in
line with Benninger - Switzerland CDR line |
Technical Data :
| Main speed |
Uptol50Mtr/Min, Higher on request |
| Working width |
600 to 3400 MM |
| Heating Media |
Steam |
| Cylinder Diameter |
560 MM, 760 MM, 800 MM |
| Cylinder sheet |
| Thickness |
2 MM, 2.5 MM, 3 MM |
| Working pressure |
5 KGS / higher on request |
| Teflon coated |
50 Microns / higher on request |
| Drive to Cylinder |
Belt or Direct Gear motor |
| Stainless Steel |
| Material |
304 Quality, 316 Quality on request |
| End shaft |
Forged steel |
| Cooling Cylinder |
Double shell Jacketed and spiral flow |
| Rotary joints |
Special grade seas of teflon material from Dupont - USA. |
| Hose pipe |
Special grade teflon material with stainless steel wire braiding. |
|
|